Drift Align using PHD

The base for all our tutorials, be it how to polar align or master astro imaging

Moderators: hawk_eye1975, budgetastro, martin_h


TUTORIALS SECTION

This section is only for the posting of actual tutorials, either single post or multiple, to ask questions or comment on a tutorial, please use the TUTORIAL DISCUSSIONS section where you will find a topic titled for each topic posted here, it just helps stop the topics becoming convoluted and lets the tutorials flow properly. If you post a tutorial, please also post a topic into TUTORIAL DISCUSSIONS with the same title.

Thanks.

Drift Align using PHD

Postby martin_h » Sat Aug 13, 2011 4:55 pm

The process begins as all the other drift alignments. To check the RA alignment chose a star at 0° elevation close to the meridian. To set the DEC alignment choose a star as close to the E or W horizon as possible.

Turn on the guiding program (PHD) , select the mount and camera and run through your calibration as usual.

To Check the RA select a star near the Meridian at 0° elevation. (or as close as you can get)
Start Guiding on the selected star.
Turn on the GRAPH and select DX/DY instead of RA/DEC.
Turn off the DEC guiding
If your mount is perfectly aligned the DY ( red line) should track across the graph near the center line. If it drifts up or down you need to make a very small adjustment to your AZIMUTH screws to compensate for that. You will see the change immediately. No need to wait 5 or 10 minutes for the visual drift.
Now set up the elevation.
Stop the guiding and look for a star near the western or eastern horizon at whatever elevation allows you to clear any obstruction. The lower the better.
Recalibrate the guiding on the new star.
As in step 3,4 & 5 above start guiding and make sure that the DEC guiding is off.
Once again if your alignment is on then the DY trace should not drift from the horizontal graph line. If it does, carefully make small adjusts to the ELEVATION screws to compensate. Again you should see an immediate change in the graph.
Repeat as nessissary.

Discuss here :-

viewtopic.php?f=42&t=9011&p=63572#p63572

Hi, you are viewing as a guest, You can only see this first post in this topic. if you sign up you get access to other goodies you can't even see as a guest, including video tutorials on imaging and processing, scope modifications and even member discounts on gear!

So, give us a try, what have you got to lose! Oh, and if you stay, when you reach 50 posts you get access to MORE goodies! What are you waiting for!

User avatar
martin_h
Black Dwarf
 
Posts: 2415
Joined: Thu Mar 24, 2011 5:40 pm
Location: Grimsby UK

Return to TUTORIALS

Who is online

Users browsing this forum: No registered users and 1 guest