eq5 synscan cable shroud simple mod

The base for all our tutorials, be it how to polar align or master astro imaging

Moderators: hawk_eye1975, budgetastro, martin_h


TUTORIALS SECTION

This section is only for the posting of actual tutorials, either single post or multiple, to ask questions or comment on a tutorial, please use the TUTORIAL DISCUSSIONS section where you will find a topic titled for each topic posted here, it just helps stop the topics becoming convoluted and lets the tutorials flow properly. If you post a tutorial, please also post a topic into TUTORIAL DISCUSSIONS with the same title.

Thanks.

eq5 synscan cable shroud simple mod

Postby jeffindonny1965 » Sun Jun 03, 2012 11:12 pm

This was about half hour to do.
With the origanal eq5 cover off to keep it safe use a dremell pointed grinding stone make sure holes aren't too close so cable insert retainers don't over lap rotate dremell piece to form a decent circle check regular for size the round sanding bit is a perfect size match so once near gently insert sanding piece till its a moves in and out freely.
Use the origanal screws to tap in make sure you position them right other wise when you go to insert plugs they will over lap.
Mark plug inlets d/r so you don't mix them up.
Job done....

Hi, you are viewing as a guest, You can only see this first post in this topic. if you sign up you get access to other goodies you can't even see as a guest, including video tutorials on imaging and processing, scope modifications and even member discounts on gear!

So, give us a try, what have you got to lose! Oh, and if you stay, when you reach 50 posts you get access to MORE goodies! What are you waiting for!

jeffindonny1965
Protostar
 
Posts: 117
Joined: Tue Mar 13, 2012 11:43 pm

Return to TUTORIALS

Who is online

Users browsing this forum: No registered users and 1 guest

cron